EN
Smart Charger is an ultra-compact and lightweight high-voltage generator specifically designed for robotic arms and mobile automation systems. By enabling materials to be temporarily attached to each other using electrostatic methods, it offers revolutionary ease of use in sensitive processes such as IML (In-Mold Labeling).
Static Electricity Charging Power Supply is a high-performance unit designed for high voltage applications in industry, DC-powered static bars, and processes where materials need to be temporarily bonded to each other using the electrostatic method.
Static Electricity Charging Power Supply is designed for high voltage requirements in industry, DC-powered static bars, and advanced processes where materials must be temporarily attached to each other using electrostatic force. By offering higher voltage and current capacity compared to the 20kV model, it handles more demanding industrial tasks.
Static Electricity Charging Power Supply; as the top segment of the series, is manufactured for the 40kV voltage requirements in industry, DC-powered bars, and electrostatic separation or bonding processes requiring extreme power.
Static Electricity Charging Power Supply; as the top segment of the series, is manufactured for the highest voltage requirements in industry, DC-powered bars, and electrostatic separation or bonding processes requiring extreme power.
The 100kV Static Charge Generator, the pinnacle of the Puls series, is the most powerful energy unit designed for industrial processes requiring extreme high voltage, scientific research, and massive-scale separation systems.
Smart Charger is an ultra-compact and lightweight high-voltage generator specifically designed for robotic arms and mobile automation systems. By enabling materials to be temporarily attached to each other using the electrostatic method, it offers revolutionary ease of use in sensitive processes such as IML (In-Mold Labeling).
Smart Charger Kit (ECK01) is a professional control interface designed to remotely control Smart Charger series compact high-voltage generators, precisely adjust the output voltage, and monitor the operational status of the system.
Mini Distributor 6 Pin is an ultra-compact distribution unit used particularly in IML (In-Mold Labeling) robots and labeling apparatuses, ensuring the material adheres perfectly to the surface by distributing high voltage to 6 different points.
Mini Distributor 4 Pin is a strategic charging element that, thanks to its compact structure, can be concealed within IML (In-Mold Labeling) apparatuses and "Dami" (carrier mandrel) systems, distributing high voltage simultaneously to 4 different points.
PULS Charging Bars are designed for all industrial processes where materials must temporarily adhere to a surface or to each other via electrostatic force without leaving a physical mark or causing damage. They enable high-resistance materials such as paper and plastic to lock onto conductive surfaces without the use of any chemical adhesives.
PULS Charging Bars are designed for all industrial processes where materials must be temporarily bonded to a surface or to each other without leaving marks or causing damage. Without the need for any chemical adhesives, they ensure that materials such as paper and plastic are clamped to conductive surfaces with the help of electrostatic force.
Puls Hole Detector is a high-speed control unit designed specifically for the packaging and wrapping industry to detect holes in materials passing through the production line and to count bags by detecting these holes.
It detects up to 300 holes per minute with 18kV adjustable output voltage and PLC compatibility. Thanks to its titanium needle sensor, it provides a durable, high-speed, and cost-effective counting solution for plastic bag production lines.
The Antistatic IML Sponge, the most critical contact point of static charging apparatus, is a special semi-conductive material resistant to high voltage. By distributing the energy from the static charging generator homogeneously across the surface of the label, it ensures perfect adhesion in in-mold labeling (IML) processes.
5 PIN IML is a static charging element designed for the flawless, smooth, and rapid placement of labels into the mold during in-mold labeling processes, and it is much more durable compared to traditional sponge and bar systems.
DC High Voltage Distributor is a connection hub designed to distribute high voltage from a single generator to multiple bars or apparatuses in a safe and organized manner in static charging applications.0
GKA75/01 is an industrial-type power unit designed to generate the high voltage required for anti-static equipment (ionizing bars, air guns, and nozzles). Serving as the heart of active ionization systems, it ensures the neutralization of unwanted static charges on surfaces.
5500VAC Power Unit is a reliable and compact energy source that provides the high voltage required for the operation of anti-static capacitive bars. By ensuring the neutralization of static charges accumulated on materials during production processes, it eliminates production defects and the risks of electrical shocks.
PULS 100Hz Anti-Static Power Supply; unlike standard power units, has been developed to provide professional neutralization in the most demanding and high-speed production lines, thanks to its high-frequency operating principle and dual high-voltage outputs.
Anti Static Electric Eliminating Power Supply units are high voltage generating sources required for active ionization tools.
HIPER30 is an intelligent system that does not just "eliminate" static electricity, but "manages" it. Unlike traditional methods, it measures the charge on the material in real-time through sensor feedback technology and provides adaptive neutralization based on demand. It is a fully autonomous solution that makes production processes error-free and highly efficient.
Anti-Static Ionizer Bars; are the most widely used, high-performance static eliminators and preventers for solving problems caused by static electricity in industry. They increase efficiency by preventing materials from sticking to each other or to machine components during production processes.
HPR Series is a solution that raises the standards in static elimination with its new generation design and embedded microprocessor-controlled power unit. It is the number one choice, especially for modern machine manufacturers, thanks to its ability to operate with only 24 VDC power supply without the need for an external high-voltage transformer and its impressive range of up to 500 mm.
Anti-Static Capacitive Bar; is a special static electricity preventer developed specifically for low-grammage processes where sensitivity is at its peak, thin paper operations, and delicate woven fabrics such as silk. Thanks to the capacitive structure in its design, it does not produce arcs or sparks from its needles, providing safe neutralization even for the most sensitive materials. It is used in conjunction with a 5500V power supply.
Ion Ring; is a circular static eliminator system specifically designed to neutralize static electricity generated during the transportation or mixing of fluid granular materials (granules, powders, masterbatch, etc.).
Puls Anti-Static Carbon Brush; is a "passive" ionizer that does not require any external power source (Power Supply). It operates on the principle of conducting the static electric charge formed on the surface directly to the ground by flowing through millions of nano carbon fibers. It is the most economical and easiest-to-install static solution.
AC/DC High Voltage Distributor is a strategic auxiliary equipment designed to establish a secure bridge between power supplies and anti-static ionizer elements in high voltage and DC applications, while multiplying connections and resolving cabling clutter.
Blower-connected anti-static bar is an air-assisted solution developed to neutralize static charges at long distances where standard ionizer bars cannot reach. Thanks to its integrated air apparatus, it spreads ionized air over a wide area, rapidly eliminating disruptive static electricity on the production line.
PULS KDA75-02 Series is a compressor-assisted air-ionization system developed for situations where static electricity problems exist but the ionizer bar cannot be mounted close to the material (at standard distances). Thanks to its high-tech design, it protects the production flow by neutralizing static charges from long distances.
Air-type Anti-Static Ion Unit; is a fan-assisted ionization system specifically designed to neutralize the static charge of free-falling materials in granule, raw material, and masterbatch production lines.
Dual-Fan ESD Ionization Unit; has been specially developed to neutralize static electricity accumulating in narrow spaces and deep containers, and to provide ambient ionization in wide work areas via air vents. With its compact design and powerful dual-fan structure, it eliminates dusting and electrical errors caused by static charge.
PULS Single-Fan Anti-Static Blower; is a motorized ionization unit designed to neutralize disruptive static charges accumulating over long distances and wide areas, specifically for situations where static-eliminating bars cannot be positioned close to the material.
PULS Double-Fan Anti-Static Blower; is a dual-motor, high-airflow static eliminator designed to neutralize disruptive static charges in wide-surface areas and high-speed production lines where ionizer bars cannot be positioned close to the material.
PULS Anti-Static Air Gun; is a high-performance, manual-use ionization tool designed to remove dust particles effectively "stuck" to surfaces by neutralizing the static charge and cleaning the material on industrial production lines.
Anti-Static Air Nozzles; are compact ionization solutions designed to neutralize high static charges in narrow and restricted areas where standard anti-static bars cannot fit on industrial production lines. Thanks to compressed air support, they provide fast and effective neutralization by focusing ions on small points.
Flexible Arm Anti-Static Nozzle; is an ionization unit that can be bent in any direction, designed to reach narrow gaps and impossible-to-reach corners where standard bars cannot fit in industrial production lines. It is ideal especially for deep containers (bottles, buckets, pipes, etc.) and sensitive points where regional static charges must be neutralized.
SF-156 Static Meter is a professional diagnostic device that makes "invisible" static electricity visible, which causes major problems on production lines. It not only shows where and how the static charge is formed but also precisely measures the amplitude (amount) and polarity (+ or -) of the charge.
The SP-1000 is a non-contact high voltage detector developed to determine whether static electricity prevention systems (AC power supplies, AC bars, and AC cables) are operational. It makes maintenance and control processes safe by detecting invisible high voltage through both visual (LED) and audible (Buzzer) alerts.
